Support for Windows Products
Support for Windows Products
How To Fix Directory Error Mumps
If you have Directory Error Mumps then we strongly recommend that you download and run this (Directory Error Mumps) repair tool.
Symptoms & Summary
Directory Error Mumps and other critical errors can occur when your Windows operating system becomes corrupted. Opening programs will be slower and response times will lag. When you have multiple applications running, you may experience crashes and freezes. There can be numerous causes of this error including excessive startup entries, registry errors, hardware/RAM decline, fragmented files, unnecessary or redundant program installations and so on.
In order to fix your error, it is recommended that you download the 'Directory Error Mumps Repair Tool'. This is an advanced optimization tool that can repair all the problems that are slowing your computer down. You will also dramatically improve the speed of your machine when you address all the problems just mentioned.
Recommended: In order to repair your system and Directory Error Mumps, download and run Reimage. This repair tool will locate, identify, and fix thousands of Windows errors. Your computer should also run faster and smoother after using this software.
File Size 746 KB
Compatible Windows XP, Vista, 7 (32/64 bit), 8 (32/64 bit), 8.1 (32/64 bit) Windows 10 (32/64 bit)
Index »Code_Aster installation »Problem with MUMPS: Cannot find -lmpi_f77 _f90 Pages: 1 #1 2016-08-23 14:16:42 filjan Member Registered: 2016-07-11 Posts: 8 Problem with MUMPS: Cannot find -lmpi_f77 _f90 Hi!When I try install MUMPS-4.10.0, by "make all" command (according with tutorial https://sites.google.com/site/codeaster … 4-english). I meet the error:Error wrote:make ARITH=s mumps_libmake: Entering directory '/opt/mumps-4.10.0_mpi'(cd src ; make s)make: Entering directory '/opt/mumps-4.10.0_mpi/src'make ARITH=s mumps_libmake: Entering directory '/opt/mumps-4.10.0_mpi/src'make: Nothing to be done for 'mumps_lib'.make: Leaving directory '/opt/mumps-4.10.0_mpi/src'make: Leaving directory '/opt/mumps-4.10.0_mpi/src'make: Leaving directory '/opt/mumps-4.10.0_mpi'(cd examples ; make s)make: Entering directory '/opt/mumps-4.10.0_mpi/examples'mpif90 -o ssimpletest -O -fopenmp ssimpletest.o ../lib/libsmumps.a ../lib/libmumps_common.a -L/opt/aster/public/metis-4.0.3/lib -lmetis -L../PORD/lib/ -lpord -L/opt/aster/public/scotch-5.1.11_esmumps/lib -lesmumps -lscotch -lscotcherr /opt/scalapack/lib/libscalapack.a /opt/OpenBLAS/lib/libopenblas.a -L/usr/lib -lmpi -lmpi_f77 -lmpi_f90 -L/opt/OpenBLAS/lib/ -lopenblas -lpthread/usr/bin/ld: cannot find -lmpi_f77/usr/bin/ld: cannot find -lmpi_f90collect2: error: ld returned 1 exit statusMakefile:28: recipe for target 'ssimpletest' failedmake: *** [ssimpletest] Error 1make: Leaving directory '/opt/mumps-4.10.0_mpi/examples'Makefile:42: recipe for target 'sexamples' failedmake: *** [sexamples] Error 2Please help me dear Code_aster community: )Best regards Offline #2 2016-08-24 09:29:58 katoulos Member Registered: 2011-06-10 Posts: 54 Re: Problem with MUMPS: Cannot find -lmpi_f77 _f90 Well, to me it looks like your system has the libraries libmpi.a , libmpi_f77.a , libmpi_f90.a at a different location than /usr/lib(your Makefile.inc should have a line like the
to a max of 1 MB (from .25 M) Add diskerrors in DB_STAT and ^$SYSTEM("VOL",n,"diskerrors") Remove panic("parse_merge() source_ptr wrong!!") in parse.c replace with SYNTX Make $&%HOST(address,"NAME") work for a non-null address In database Kill, ensure we have lots of free garbage queue entries. Note: Version 1.38 was not released. Changes from version 1.36 to 1.37 are: Minor changes only. Add $&X(str,1) for four byte crc. Add version to MUMPS_CRASH file. Fix $J(-.02,0,2) removing the minus. Changes from version 1.35 to 1.36 are: This version is a maintenance version with some tidy up included to start the port to Apple Mac OS X - the following changed: Make it so $J(-.0001,0,2) does not return a leading minus. http://code-aster.org/forum2/viewtopic.php?id=20790 Remove #include from a few source files. Wait longer in ForkIt so we don't get a panic with: ForkIt: Child job never got setup Make $&%DIRECTORY() work with a supplied directory spec. Ensure $FN(n,"P",2) has a leading zero where -1 < n < 1. Change $STORAGE to return 1024 instead of 42. Tidy up the runtime functions code. Changes from version 1.34 to 1.35 are: This release provides a fix to two problems introduced with decimal http://mumps.sourceforge.net/oldmumps.html arithmetic. WRITE 0-0 should return 0 not -0. A loop of the form FOR A=12345:.0001 fails to increment - now fixed. Changes from version 1.33 to 1.34 are: An external call $&%COMPRESS() has been added as follows: XCall: $&%COMPRESS Form: $&%COMPRESS(global,level) ;A level of 99 means "the lowest level" Retn: The level done or negative MUMPS error number Eg: W $&%COMPRESS("^UTILITY",99) ;Compress the data level of UTILITY Note: This call updates $REFERENCE as it goes. A utility COMPRESS has been added to simplify using $&%COMPRESS. Because of problems like: W 34711703.91+13711.55 giving: 34725415.45999999 we have removed all floating point maths and replaced it with the decimal maths from FreeMUMPS. Add ^$SYSTEM("PRECISION") for decimal precision (defaults to 12). Add ^$JOB(job,"PRECISION") for decimal precision (default to ^$S("PRECISION")). Both may be set with priv in the range 0 to 31. The change to decimal arithmetic has improved the speed of FOR loops considerably. WARNING: Although both the new arithmetic and the compress code have been tested, there are possibly still bugs there. Changes from version 1.32 to 1.33 are: The database "out of space" check caused an endless loop on a nearly full database - this has been fixed. The construct LOCK (^FRED(1,2,3),^FRED(2)) was corrupting locktab causing following lock operations to result in a core dump - now fixed. In some cases (fairly low probability), a KILL would fail
here for a quick overview of the site Help Center Detailed answers to any questions you might have Meta Discuss the workings and policies of this site About Us Learn more about Stack Overflow http://stackoverflow.com/questions/32649782/gt-m-error-while-building-source the company Business Learn more about hiring developers or posting ads with us Stack Overflow Questions Jobs Documentation Tags Users Badges Ask Question x Dismiss Join the Stack Overflow Community Stack Overflow is a community of 4.7 million programmers, just like you, helping each other. Join them; it only takes a minute: Sign up GT.M - Error while building source up vote 0 down vote favorite I get GT.M source from : http://sourceforge.net/projects/fis-gtm/files/GT.M-x86-Linux-src/V6.2-002A/ directory error Extract and do the steps in the README file ,but I get error on the following step : $ make After that command , error occurred : root@localhost:~/test_gtm/fis-gtm-V6.2-002A/fis-gtm-V6.2-002A# make [ 0%] Built target gen_gtm_threadgbl_deftypes [ 1%] Built target libstub [ 1%] Building C object CMakeFiles/libmumps.dir/sr_unix/ctrly_set.c.o In file included from /root/test_gtm/fis-gtm-V6.2-002A/fis-gtm-V6.2-002A/sr_unix/ctrly_set.c:17:0: /root/test_gtm/fis-gtm-V6.2-002A/fis-gtm-V6.2-002A/sr_port/fix_xfer_entry.h:22:23: fatal error: xfer_desc.i: No such file or directory compilation terminated. make: *** [CMakeFiles/libmumps.dir/sr_unix/ctrly_set.c.o] Error 1 make: *** [CMakeFiles/libmumps.dir/all] Error 2 make: directory error mumps *** [all] Error 2 I see that bug fix on this : https://lists.debian.org/debian-med/2012/06/msg00230.html but it still occurred with me Please show me what's wrong ? mumps share|improve this question asked Sep 18 '15 at 10:29 Ryo 367719 add a comment| 2 Answers 2 active oldest votes up vote 1 down vote accepted I have had this problem before. Try doing xfer_desc.i as the make target itself. sam@thebes:~/repos/fis-gtm-V6.2-002A$ make gen_xfer_desc Generating xfer_desc.i Built target gen_xfer_desc Then make the rest. share|improve this answer edited Sep 21 '15 at 15:17 answered Sep 19 '15 at 2:24 Sam Habiel 1337 Thank ,which folder should I run this command ?.I run from fis-gtm-V6.2-002A in extracted tar file but It said that make: *** No rule to make target xfer_desc.i'. Stop.` –Ryo Sep 19 '15 at 9:13 I gave you the wrong target. It's gen_xfer_desc. –Sam Habiel Sep 21 '15 at 15:20 add a comment| up vote 1 down vote I know we had an error with the CMakeLists.txt files in the original source tarball. I have successfully downloaded and built GT.M from the current source tarball. What is the cksum or md5sum of the source tarball you are using? share|improve this answer answered Sep 21 '15 at 13:59 K.S. Bhaskar 1914 Thanks Mr.Bhaskar , a
Directory Error games PC games directory error tmp path doesn t exists Windows games Windows phone games Entertainment All Entertainment Error Is A Directory Utorrent Movies TV Music Business Education Business Students educators omitting directory error in unix Developers Sale Sale Find a store Gift cards Products Software services Windows Office Free downloads security Internet Active Directory Error Explorer Microsoft Edge Skype OneNote OneDrive Microsoft Health MSN Bing Microsoft Groove Microsoft Movies TV Devices Xbox All Microsoft devices Microsoft Surface All Windows PCs tablets PC accessories Xbox games Microsoft Lumia All an active directory error x Windows phones Microsoft HoloLens
directory error cache
directory error /var/lib/zarafa-webapp/tmp is not writable
Edirectory Error Errors While Stopping ndssnmpsa Section Compiling edir mib Section Modifying the SNMP Configuration File Section Using SNMP After a New Tree Installation Section SNMP Object Creation Error on a href https www netiq com documentation edir edir tshoot data bgpln html view print https www netiq com documentation edir edir tshoot data bgpln html view print a Windows Server Section Uninstalling SNMP with eDirectory Uninstallation Issues After Upgrading from eDirectory to eDirectory After upgrading from eDirectory to eDirectory you might get the following error Attempting to restart the NetIQ eDirectory SNMP subagent ndssnmpsa Starting NDS SNMP Subagent Initialization
There are many reasons why Directory Error Mumps happen, including having malware, spyware, or programs not installing properly. You can have all kinds of system conflicts, registry errors, and Active X errors. Reimage specializes in Windows repair. It scans and diagnoses, then repairs, your damaged PC with technology that not only fixes your Windows Operating System, but also reverses the damage already done with a full database of replacement files.
A FREE Scan (approx. 5 minutes) into your PC's Windows Operating System detects problems divided into 3 categories - Hardware, Security and Stability. At the end of the scan, you can review your PC's Hardware, Security and Stability in comparison with a worldwide average. You can review a summary of the problems detected during your scan. Will Reimage fix my Directory Error Mumps problem? There's no way to tell without running the program. The state of people's computers varies wildly, depending on the different specs and software they're running, so even if reimage could fix Directory Error Mumps on one machine doesn't necessarily mean it will fix it on all machines. Thankfully it only takes minutes to run a scan and see what issues Reimage can detect and fix.
A Windows error is an error that happens when an unexpected condition occurs or when a desired operation has failed. When you have an error in Windows, it may be critical and cause your programs to freeze and crash or it may be seemingly harmless yet annoying.
A stop error screen or bug check screen, commonly called a blue screen of death (also known as a BSoD, bluescreen), is caused by a fatal system error and is the error screen displayed by the Microsoft Windows family of operating systems upon encountering a critical error, of a non-recoverable nature, that causes the system to "crash".
One of the biggest causes of DLL's becoming corrupt/damaged is the practice of constantly installing and uninstalling programs. This often means that DLL's will get overwritten by newer versions when a new program is installed, for example. This causes problems for those applications and programs that still need the old version to operate. Thus, the program begins to malfunction and crash.
Computer hanging or freezing occurs when either a program or the whole system ceases to respond to inputs. In the most commonly encountered scenario, a program freezes and all windows belonging to the frozen program become static. Almost always, the only way to recover from a system freeze is to reboot the machine, usually by power cycling with an on/off or reset button.
Once your computer has been infected with a virus, it's no longer the same. After removing it with your anti-virus software, you're often left with lingering side-effects. Technically, your computer might no longer be infected, but that doesn't mean it's error-free. Even simply removing a virus can actually harm your system.
Reimage repairs and replaces all critical Windows system files needed to run and restart correctly, without harming your user data. Reimage also restores compromised system settings and registry values to their default Microsoft settings. You may always return your system to its pre-repair condition.
Reimage patented technology, is the only PC Repair program of its kind that actually reverses the damage done to your operating system. The online database is comprised of over 25,000,000 updated essential components that will replace any damaged or missing file on a Windows operating system with a healthy version of the file so that your PC's performance, stability & security will be restored and even improve. The repair will deactivate then quarantine all Malware found then remove virus damage. All System Files, DLLs, and Registry Keys that have been corrupted or damaged will be replaced with new healthy files from our continuously updated online database.
Downloads in November: 361,927
Download Size: 746KB
To Fix (Directory Error Mumps) you need to follow the steps below:
Download Directory Error Mumps Repair Tool
Click the "Scan" button
Click 'Fix All' and the repair is complete.
Windows Operating Systems:
Compatible with Windows XP, Vista, Windows 7 (32 and 64 bit), Windows 8 & 8.1 (32 and 64 bit), Windows 10 (32/64 bit).